The settings menu can only be accessed when the oven is in clock mode.

This function allows the appliance to lock (On) the controls. When the function is active, the indicator lights up on the display.

To disable the function, go back to the Settings menu and select OFF.

Enables (On) or disables (OFF) the sounds emitted by the oven.

Sets the time display to a 12 (12H) or 24 hour (24H) format.

The factory default time Format function is set to 24h.

This setting can also be accessed by pressing the START/STOP button for at least 3 seconds with the oven in clock mode.

Set the units of measurement for temperature and weight (for the Chef Menu) according to the following table:

This allows you to select the brightness of the display according to the following table:

The factory default Display brightness function is set to 5.

If enabled (On), it allows the brightness of the display to be lowered automatically when the oven is in clock mode.

It has no effect if the brightness of the display is already set to 1.

Allows you to set the level of water hardness  in order to optimise the descaling process.

The factory default water Hardness function is set to medium 3.

The frequency with which you are promoted to run a descaling cycle depends on the water hardness setting. The number of hours of use of the steam functions, at the end of which descaling will be requested, is as follows:

If enabled (On) it allows you to start a
descaling cycle (see “4.1 Descaling (Fig.
E)”.

Settings Menu

Settings Menu