The instructions manual contains cleaning and maintenance instructions and recommendations from the manufacturer to the customer. Any other intervention should be carried out by an authorised service centre. Before cleaning, ALWAYS remove the plug from the mains power supply and allow the appliance to cool down.

• Do not use steam jets to clean the appliance.

• Do not use cleaning products containing chlorine, ammonia or bleach on steel parts or parts with metallic surface finishes.

• Do not use abrasive or corrosive detergents.

• Do not use rough or abrasive materials or sharp metal scrapers.

• Clean the components and accessories regularly after each use.

To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first.

Always and only use specific products that do not contain abrasives or chlorine-based acids. Pour the product onto a damp cloth and wipe the surface, rinse thoroughly and dry with a soft cloth or a microfibre cloth.

Do not use steel sponges and sharp scrapers as they will damage the surface. Use normal, non-abrasive products and a wooden or plastic tool, if necessary. Rinse thoroughly and dry with a soft cloth or a microfibre cloth. Do not allow residues of sugary foods (such as jam) to set inside the oven. If left to set for too long, they might damage the enamel lining of the oven.

Wash all accessories in warm soapy water with a soft sponge or a soft cloth. Rinse and dry thoroughly. Do not use abrasive detergents, metallic sponges or metal tools to clean the accessories as they may damage the surfaces. In order to extend the life of the accessories, it is recommended not to wash them in a dishwasher.

The glass in the door should always be kept thoroughly clean. Use absorbent kitchen roll. In case of stubborn dirt, wash with a damp sponge and an ordinary detergent.

In order to keep your oven in the best possible condition, clean it regularly after letting it cool down. Avoid letting food residue dry inside the oven cavity, as this could damage the enamel. For easier cleaning, we recommend that you remove the side guides. Simply pull the frame, carefully, to release it from the fastenings at the side. To reinstall it, just insert it into the side fastenings and apply light pressure.

Using the steam function for assisted cleaning

 The steam function can be used to soften any cooking residues, making it easier to remove them. Before starting the function, we recommend that you spray a solution of water and dishwashing liquid onto the side walls of the cooking compartment.

Cooking food generates moisture inside the appliance. This is normal and does not affect the appliance's operation in any way. Each time you finish cooking:

Cleaning and maintenance

Cleaning and maintenance