11)Displays the unit of measurement set. 

12)Overload indicator. “Err” appears on the display when the maximum weighing capacity of the scale has been exceeded. 

13)Unstable indicator. “UnSt” appears on the display when the scale is turned on and the load cell detects an unstable weight. 

14)Low battery indicator. The icon is steady on the display when the battery charge is less than 30%. 

15) Flat battery indicator. The icon flashes on the display when the battery charge is less than 10%. Charge the battery.

The battery can be charged by connecting the USB cable to a USB charger or a USB wall adapter. 

• Insert the charging cable into the USB-C port on the rear. 

• Insert the other end into an approved USB charger. 

The battery icon flashes on the display during charging and turns to a steady icon when charging is complete. The scale also recharges when the button (5) is set to OFF. The scale can be used even when charging the battery. 

If the scale switches to stand-by mode, press the ON (8) button: a 0 will appear on the display and the battery icon will start flashing. 

Once the battery is full charged ensure to disconnect it from the power supply to aviod over-charging and also in order to prolong the battery life.

We recommend using a standard USB charger - 5V/2A. The time for a full battery charge is two hours.

Description of the product

Description of the product